- If you find a qualifying lower price online, call 1-866-859-0896 and provide a customer service agent the web site with the lower price.
- On qualifying products, AVLeaderz will verify the current price to complete the price match.
Kicker KMA6001, KMA Monoblock Weather-Resistant Mono Subwoofer Marine Amplifier (45KMA6001)
TOP TECH
Purpose-built for your boat, every KM amp comes complete with marine-grade speaker terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections.
TUNED
Dialing in your sound is easy with KM amps. Variable 12dB crossovers are built in, plus a 24dB subsonic filter is also included on the KMA600.1 mono amplifier, and Amp 3 of the KMA450.6. The amplifiers are also equipped with the KickEQ™ variable 12dB bass boost!
IN THE ZONE
KICKER created the KMA450.6 to power up to three independent full-range zones! This six-channel, 450-watt amp provides an easy way to get the perfect volume levels on (or off) the deck, in the water, or inside the cabin. Control the volume of one zone with the receiver. Another zone is controlled with the included full-range volume knob, which can be mounted on (or under) nearly any flat surface.
BIG BUMP
Experience the perfect way to get bass on your boat! A mighty Class-D power plant, 12dB crossover and subsonic filter all help you dial in the best sound. Use the remote level control to adjust the bass right from the dash and connect the full-range RCA outputs to expand your system!
- Class-D Power Supply
- Mono Amplifier
- Conformal-Coated Circuit Board
- Remote Level Control Included
- Variable 12dB Crossover
- KickEQ™ Variable 12dB Bass Boost
- 24dB Subsonic Filter
- Full-Range RCA Output
- ABYC/NMMA-Compliant Power Connections
- 316L Stainless-Steel Hardware Included
This KM-Series amplifier delivers as much as 600 watts into one channel. See below for more details.
|
Weather Resistance | Conformal-Coated |
Number of Channels |
1 |
Class |
D |
Peak Power Rating (Watts) |
|
RMS Power Rating (Watts x Channels) - 4 Ohms |
300 x 1 |
RMS Power Rating (Watts x Channels) - 2 Ohms |
600 x 1 |
RMS Power Rating - Bridged | N/A |
Minimum Impedance Unbridged (Ohms) |
2 |
Minimum Impedance Bridged (Ohms) |
N/A |
THD at Rated RMS Power |
1% |
Bulit-in Crossover - Low Pass |
Yes |
Built-in Crossover - High Pass |
N/A |
High Pass Crossover Frequency (Hz) |
N/A |
Low Pass Crossover Frequency (Hz) |
50-200hz |
Signal-to-Noise Ratio |
75dB |
Bass Boost |
0-12dB @40Hz |
Bass Remote Included |
No |
Fuse Rating | 80A |
CEA-2006 Compliant | |
Maximum Power Wire Gauge Size | 4 Gauge |
Warranty | 1 Year |
Weather Resistance | Conformal-Coated |
Number of Channels |
1 |
Class |
D |
Peak Power Rating (Watts) |
|
RMS Power Rating (Watts x Channels) - 4 Ohms |
300 x 1 |
RMS Power Rating (Watts x Channels) - 2 Ohms |
600 x 1 |
RMS Power Rating - Bridged | N/A |
Minimum Impedance Unbridged (Ohms) |
2 |
Minimum Impedance Bridged (Ohms) |
N/A |
THD at Rated RMS Power |
1% |
Bulit-in Crossover - Low Pass |
Yes |
Built-in Crossover - High Pass |
N/A |
High Pass Crossover Frequency (Hz) |
N/A |
Low Pass Crossover Frequency (Hz) |
50-200hz |
Signal-to-Noise Ratio |
75dB |
Bass Boost |
0-12dB @40Hz |
Bass Remote Included |
No |
Fuse Rating | 80A |
CEA-2006 Compliant | |
Maximum Power Wire Gauge Size | 4 Gauge |
Warranty | 1 Year |
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to