Price Match Guarantee
Price Match Guarantee
AVLeaderz Cares! We are dedicated to offering the best value to our customers, always. We will match the price, at the time of purchase, on a Price Match Guarantee product if you find the same item at a lower price at a qualifying online retailer or at a local retail competitor's store. Here's how:

  • If you find a qualifying lower price online, call 1-866-859-0896 and provide a customer service agent the web site with the lower price.
  • On qualifying products, AVLeaderz will verify the current price to complete the price match.
Exclusions may apply including, but not limited to, items sold by Marketplace vendors, competitors' service prices, special daily or hourly sales, and items for sale the Sunday before Thanksgiving Day through the Monday after Thanksgiving. More Details

Wet Sounds Sinister-SDX2500, Sinister Class D Monoblock Marine Subwoofer Amplifier - 2500W

SKU: WET-Sinister-SDX2500 UPC: 814820025910
Out of stock
Regular price $1,519.99
Regular price Sale $1,899.99 Sale price $1,519.99

The Sinister-SDX 2500 Class D Mono Block Subwoofer Amplifier is the most powerful amplifier Wet Sounds has ever built. Employing Class D technology plus the Wet Sounds exclusive MAXED Power Supply, the Sinister-SDX 2500 achieves an efficiency rating of over 87% - one of the highest available in a marine amplifier. This means more power, less current drain, less strain on the electrical system, less generated heat. All resulting in more playing time!

The Sinister-SDX 2500 uses the same intelligent microprocessor controlled protection circuitry used on all Sinister SDX amplifiers for overvoltage/undervoltage protection, DC offset & speaker short protection, as well as thermal rollback to ensure consistent play in the harsh marine environment. The protection circuitry is displayed in the back lit Wet Sounds shield logo. Please refer to the user’s manual for details about the protection circuitry.As further protection against use in the harsh marine environment, the SDX2500 includes a sealed chassis for the top mounted controls, and a four-layer conformal coated PC Board.

Features

  • Master/Slave configuration – Allows control of 2 or more SDX2500s from 1 set of controls. Gains, crossovers, bass boosts, subsonic filters, and remote levels can be controlled from a single “Master” SDX2500 amplifier. This eliminates gain/crossover matching normally needed when using multiple amplifiers. Also eliminates the use of RCA “Y” adaptors.See the user’s manual for more detail on this feature.
  • Bridging configuration – Allows combining the power of 2 SDX2500 amplifiers into 1 channel. NOTE – a pair of SDX2500’s in bridged mode must NOT be connected to a speaker impedance load lower than 2 Ohms! See the user’s manual for more details on this feature.
  • Remote Level Control – Included in all Sinister SDX amplifiers allows control of the total output of the amplifier.The Remote Level Control will never exceed the gain level set on the chassis of the amplifier. This control should be used as a convenience when only the bass output in the system needs to be decreased.
  • Multi color top mounted LED Badge – All Sinister amplifiers come equipped with the Wet Sounds shield logo badge that can be set to display Red, White or Blue as the status indicator. The badge can also be rotated for vertical or horizontal placement – depending on how the amplifier is mounted.
|
Weather Resistance Conformal-Coated

Number of Channels

1

Class

D

Peak Power Rating (Watts)


RMS Power Rating (Watts x Channels) - 4 Ohms

1000 x 1

RMS Power Rating (Watts x Channels) - 2 Ohms

1700 x 1
RMS Power Rating (Watts x Channels) - 1 Ohm 2500 x 1
Minimum Impedance Unbridged (Ohms)

1

Minimum Impedance Bridged (Ohms)

N/A

THD at Rated RMS Power

<1.0%

Bulit-in Crossover - Low Pass
Yes
Built-in Crossover - High Pass
Yes
High Pass Crossover Frequency (Hz)

30-300Hz

Low Pass Crossover Frequency (Hz)
30-300Hz
Signal-to-Noise Ratio

>83dB>110dB

Bass Boost
0-12dB
Bass Remote Included


Fuse Rating 120A
CEA-2006 Compliant Yes
Maximum Power Wire Gauge Size 1/0
Warranty 1 Year
Weather Resistance Conformal-Coated

Number of Channels

1

Class

D

Peak Power Rating (Watts)


RMS Power Rating (Watts x Channels) - 4 Ohms

1000 x 1

RMS Power Rating (Watts x Channels) - 2 Ohms

1700 x 1
RMS Power Rating (Watts x Channels) - 1 Ohm 2500 x 1
Minimum Impedance Unbridged (Ohms)

1

Minimum Impedance Bridged (Ohms)

N/A

THD at Rated RMS Power

<1.0%

Bulit-in Crossover - Low Pass
Yes
Built-in Crossover - High Pass
Yes
High Pass Crossover Frequency (Hz)

30-300Hz

Low Pass Crossover Frequency (Hz)
30-300Hz
Signal-to-Noise Ratio

>83dB>110dB

Bass Boost
0-12dB
Bass Remote Included


Fuse Rating 120A
CEA-2006 Compliant Yes
Maximum Power Wire Gauge Size 1/0
Warranty 1 Year

WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to